How do I know what gauge my chainsaw chain is?

Measure the distance from the tip of the chainsaw bar to the point where the bar first emerges from the saw's casing. A tape measure will provide that information. Round the measurement up to the nearest even number if the figure was uneven or fractional. The resulting number is the bar measurement.

Furthermore, what do the numbers mean on a chainsaw chain?

The numbers stamped on a chainsaw chain are an ID code used by the manufacturer to indicate the pitch and gauge measurements of the chain. Pitch and gauge are important dimensions which influence whether or not a chain is compatible with a chainsaw.

Similarly, do drive links matter on chainsaw? Number of individual drive links must be counted. No exceptions. Simple length measurements (like "a 2 foot chain) are not helpful for correctly matching chains. Chain length is determined by a combination of distance between links (pitch) and the number of links.

Similarly, it is asked, how do I identify my Stihl chain?

How to Determine Chain Saw Chain Size for a Stihl

Locate the Marketing Number stamped on the side of the chain.
Determine the pitch of the chain, which is the distance between three rivets divided by two, by locating the first digit in the Marketing Number stamped on the side of the chain.
Find the gauge of the chain by locating the number stamped on the drive link.

How many links does a 18 inch chainsaw have?

A 16" bar normally requires 66 drive links with . 325 chain, Stihl is 67 but they gotta be different. 72 indicates an 18" bar. The dealer is correct if you had 3/8" chain.

Can you change the bar length on a chainsaw?

Can you put a longer bar on a chainsaw? The answer is yes and no. Many chainsaws are designed to take different size units. For example, the Husqvarna 460 Rancher is commonly sold with a 20 inch bar and chain.

What size file do I need for a 3/8 chain?

It is vital to use the right size file. In general, 1/4- and 3/8-inch-pitch, low-profile chains call for a 5/32-inch file; 0.325-inch-pitch chains require a 3/16-inch file; and standard 3/8-inch-pitch and 0.404-inch-pitch chains demand a 7/32-inch file.

How many drive links in a 36 chain?

063) 114 Drive Links, 36RS3114.

SKU.

Length	36" (90cm)
Drive Link Count	114 Drive Links
Cutter Type	Chisel

What is the difference between .325 and 3/8 chain?

325 is a smaller top cutter and tie strap it is easier to turn for a saw . The 3/8 is a bigger top cutter and tie strap . Mainly in a 20 " chain has more cutters in .

What is a Picco chainsaw chain?

STIHL PICCO™ Super 3 is a low-profile, low-kickback saw chain. The razor-edged, square-cornered cutter shape ensures minimum chain friction for an exceptionally smooth and clean cut in hard or frozen wood.

When should I replace chainsaw chain?

When to Replace a Chainsaw Chain

Teeth are broken or worn unevenly.
Issues with Chain Tension.
Smoke is present when cutting.
Sawdust, rather than coarse chips are left behind.
Chainsaw feels unbalanced, cuts unevenly, or rattles when in use.

What do the numbers mean on a Stihl chain?

The chain tells us it is made by Stihl. The number 6 on the cutter tells us the pitch is 3/8 lo pro or (picco) and the number 3 on the drive link indicates a gauge of . 050″ (or 1.3mm).

What is chain pitch on a chainsaw?

The pitch of a chain refers to the distance between its drive links. It is determined by measuring the distance between any three consecutive drive links and dividing by two. Example: 3/4" divided by 2 = 3/8". Sometimes pitch is expressed as a fraction: 3/8" and sometimes it is expressed as a decimal: .

What are the different types of chainsaw chains?

Different Types of Chainsaw Chains

Cutter Type. Full-Chisel Cutters. Semi-Chisel Cutters. Low Profile Cutter.
Chain Sequence/Arrangement. Full Skip Chain. Semi-Skip Chain. Standard / Full House.

Do chainsaw chains stretch?

During operation, the chains of chainsaw can become loose because they stretch. This can take place in the case of normal operation as well that leads to sagging of chains on the guide bar of saw. The loop of a new chain become longer in the first use since it is used in single direction.

Are chainsaw chains universal?

Contrary to popular belief, chains in chainsaws are actually not universal. While they do serve one purpose – which is to cut trees, the truth is that they differ in specifications and structure. In general, the type of chain you will need will highly depend on the type of chainsaw that you have.

Do Oregon chains fit Stihl?

Oregon chain is a fine chain but won't HOLD a sharp edge like a stihl chain.

What is a skip tooth chain?

Skip or semi-skip chain has a further reduction in the number of teeth and is used for applications where much debris is produced, such as ripping or cross-cutting very large sections of wood.

Can you put an 18 inch bar on a Stihl ms170?

Homeowner Chain SawsStihl recommends that its MS 170, MS 171, MS 180, MS 181, MS 192 and MS 211 homeowner models be equipped with guide bars between 12 and 16 inches. The MS 250 and MS 251 models are equipped with larger 45 cc engines and are capable of driving an 18-inch bar.

Will Stihl chain fit Husqvarna?

Re: using a stihl chainsaw chain on a husqvarna sawThis isn't about Stihl chain on a Husky, but about getting the wrong pitch. Before buying a chain, you need to know the pitch, gauge and dl count that your bar takes - the brand of the chain isn't a factor by itself, regarding fit-up.

What is the most aggressive chainsaw chain?

Stihl chain is a little more expensive but it's the most aggressive chain commonly available. It's also made from the hardest steel so it holds an edge better than any other brand I've tried (including Carlton, Saber and Bailey's Woodsman Pro).